Mold Remediation in Fort Worth, TX

The contractor works only from the protocol a separate licensed consultant wrote. Typical steps: seal off the work area under negative air, remove what cannot be cleaned, HEPA-vacuum and wipe the rest, and dry everything before any rebuild. Under a pier-and-beam house that usually means bagging wet insulation, cleaning or treating the joists and subfloor, and correcting the plumbing or drainage problem behind it. In an attic it often means new insulation and decking once the roof is repaired.

Afterward a consultant does the post-remediation assessment to confirm no visible mold remains and the clearance criteria are met. The contractor then owes you a Certificate of Mold Damage Remediation within 10 days. Keep it for your insurer and for the day you sell.

Arlington Heights, Fairmount, Ryan Place

The near-west and near-south neighborhoods include many early 20th-century homes on pier-and-beam foundations. Crawl space jobs there are priced partly on access: tight clearance and long runs of wet insulation take more labor. Ask whether the bid includes the drainage or vapor barrier work that keeps the space dry afterward, because without it the job tends to repeat. Our guide to crawl space mold explains the options.

Hail and heavy rain

Fort Worth averages about 38 inches of precipitation a year (NOAA 1991–2020), with October, May, and June the wettest months, and spring storms often bring hail. A hail-damaged roof can leak into the attic for weeks before a ceiling stain shows. Heavy rain can also come all at once: during the August 2022 storm, Fort Worth measured 9.56 inches, and crews across Dallas and Tarrant counties answered hundreds of high-water calls. Water that reached garages, ground floors, or crawl spaces then is a common source of later remediation.

Newer slab homes in the north

Around Alliance and Summerfields, homes are mostly slab-on-grade. There, a supply line or water heater leak shows up at baseboards and flooring. Shifting clay soil and hard freezes like February 2021 threaten pipes in both old and new homes. The plumber fixes the line first; then the crew removes and dries what got wet.

Hiring under Texas rules

• A TDLR-licensed contractor is required at 25 contiguous square feet or more, and since September 1, 2025, crew members must be licensed or registered too. Check at tdlr.texas.gov.
• Get the protocol from an independent mold inspection in Fort Worth and have every contractor price that same scope.
• Expect the Consumer Mold Information Sheet before work starts.
• Tie final payment to a passed clearance; mold testing in Fort Worth covers it.

What it costs

North Texas contractor price guides from 2025 and 2026 put most residential jobs at about $1,500 to $6,000, or $10 to $25 per square foot, with a full attic or HVAC system above $10,000. A 2026 Dallas cost guide puts clearance at $150 to $500. On a licensed job you pay the consultant, the contractor, and the clearance separately. See the remediation cost guide.

When you call

Say whether the problem is under the house, in the attic, or along a wall, and whether it followed hail, a freeze, or a leak. The local company you are connected with will explain the next step and its cost. The call is free.

Texas requires a TDLR-licensed remediation contractor for 25 contiguous square feet or more, working from a separate consultant's protocol. Since September 2025, the workers need their own TDLR credentials too; verify at tdlr.texas.gov.