MoldHelpUSAWhat mold inspection includes
- Crawl space: standing water, wet insulation, damp framing, drain lines
- Attic and roof deck after hail or wind
- Air handler, drain pan, and condensate line
- Walls around supply lines and water heaters in slab homes
- Moisture meters and thermal imaging without opening walls
- A remediation protocol if removal is needed
Mold Inspection in Fort Worth: local factors
In pier-and-beam homes, a licensed consultant checks the crawl space for standing water, wet insulation, and damp framing, along with plumbing and drain lines. In slab homes, the focus shifts to walls around supply lines and water heaters, the attic and roof deck after storms, and the air handler with its drain pan and condensate line. Moisture meters and thermal imaging can map wet areas without opening walls.
Where removal is needed, the consultant's protocol sets out the scope, the methods, and what the finished area must meet. Under Texas law, the inspecting company may not do the removal on the same project, which keeps the report independent from the repair estimate.
The two Fort Worths an inspector sees
About 34% of Fort Worth homes were built before 1980 (Census ACS), many in the near-west and near-south neighborhoods such as Arlington Heights, Fairmount, Ryan Place, and TCU / Berkeley. Those are crawl space inspections. Newer subdivisions to the north, around Alliance, Summerfields, and Haslet, are mostly slab-on-grade, where the questions are the attic equipment and plumbing at baseboards and floors.
After storms
October, May, and June are the wettest months here (NOAA), and spring storms bring hail. If the roof was damaged, the attic deserves a look for wet insulation, stained decking, or a musty smell; our guide to mold in the attic lists the signs. After heavy rain like the August 2022 storm, when Fort Worth measured 9.56 inches, check garages, ground floors, and crawl spaces that took water.
When an inspection is worth it
- A musty smell with nothing visible, especially in an older home.
- A leak, freeze break, or roof failure that was not dried within a day or two.
- Growth that looks like 25 contiguous square feet or more, which needs a licensed protocol before removal.
- Buying an older home; Texas sellers must hand over remediation certificates issued within five years of the sale.
Cost
Homeowners across the Dallas–Fort Worth area report paying about $300 to $1,075 for a mold inspection, depending on home size, samples, and whether a written protocol is included. Looking for a free mold inspection? A free visit is usually a visual check only, so ask what is included. For lab samples or clearance alone, see mold testing in Fort Worth; once the protocol is written, mold remediation in Fort Worth covers the removal.
Booking
Mention the foundation type, any hail, freeze, or flood history, and where the smell or stain is. You will get a quote from the local company on the line, free of charge, with no commitment.
Mold Inspection cost in Fort Worth
| Job | Typical range |
|---|---|
| Mold inspection, Dallas–Fort Worth area | $300–$1,075 |
Licensing for mold inspection in Fort Worth
Paid mold assessments in Texas require a TDLR mold assessment consultant license. Verify it at tdlr.texas.gov, and remember the consultant may not also do the removal on your project.